Boiler Repair in Drobeta-Turnu Severin

About this service

Most boiler faults don't appear suddenly: they result from lack of maintenance, untreated hard water, and pressure left outside the normal range for months. Limescale in the hot water exchanger gradually reduces flow and forces the burner to work harder, leading to overheating and repeated lockouts. An annual service — legally required for gas boilers — costs a fraction of a new heat exchanger and significantly extends the appliance's life. A conscientious technician doesn't simply replace the suspect part but first checks system pressure, the state of the expansion vessel, and circulation, because an identical symptom can have completely different causes.

Boiler Repair in Drobeta-Turnu Severin, Mehedinți

Drobeta-Turnu Severin is one of the main towns in Mehedinți county, in the historical region of Oltenia.

Boiler Repair in Mehedinți

Mehedinți County, in southwestern Oltenia, has its capital at Drobeta-Turnu Severin — an ancient Roman center on the Danube bank, at the entrance to the Danube Gorge known as the Iron Gates. With a population of around 240,000, the county combines Danube and Iron Gates Natural Park tourism with diversified agriculture on the Mehedinți Plateau. The local economy is being revitalized through investment in tourism and infrastructure, capitalizing on the region's spectacular natural setting.

Estimated Prices — Boiler Repair in Drobeta-Turnu Severin

Service	Estimated Price
Call-out and diagnosis	150–300 RON
Annual gas boiler service	250–500 RON
Descaling the hot water exchanger	300–650 RON
Circulation pump replacement (labour)	250–500 RON
Expansion vessel replacement (labour)	200–450 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a boiler repair

Book the annual service at the end of summer, not in peak season when waiting times increase
Check the pressure gauge monthly; normal cold pressure is between 1 and 1.5 bar
Ask for proof of qualification before allowing work on a gas boiler
If the boiler is under warranty, use a manufacturer-approved firm so you don't lose it
Don't repeatedly top up pressure without finding the leak — the problem gets worse
Fit a magnetic filter and, in hard water areas, a softener — both greatly extend exchanger life

Frequently Asked Questions

I have heating but no hot water. Why?

That's the classic symptom of a limescaled hot water exchanger or a seized three-way valve. On boilers with plate exchangers, limescale from hard water gradually reduces heat transfer until the water no longer heats sufficiently. The solution is descaling or, in advanced cases, replacing the exchanger.

Is it worth repairing an old boiler or should I replace it?

The practical rule is that a repair shouldn't exceed 40–50% of the price of a new boiler. On appliances older than 12–15 years, with recurring faults or parts that are hard to source, replacement becomes more economical, particularly as current condensing models consume significantly less.

How long does a typical repair take?

Most call-outs are resolved in 1–3 hours if the technician has the part with them. Descaling an exchanger takes 2–4 hours. If a part must be ordered, this can extend by several days — which is why it's worth giving the exact make and model when booking.

What do I do if I smell gas in Drobeta-Turnu Severin?

Don't touch light switches and don't light any flame. Close the gas valve, open windows wide, and leave the property, then call the gas distributor's emergency number from outside. This isn't a job for a boiler technician but an emergency to be reported immediately.

Why does my boiler make banging noises?

Banging on startup usually indicates limescale deposits in the main heat exchanger causing localised boiling. Continuous noise can come from a worn circulation pump or air trapped in the system. Both situations worsen if ignored and lead to more expensive failures.

Does the technician bring spare parts?

Commonly used parts — sensors, electrodes, seals, expansion vessels — are usually in the van. Model-specific components such as control boards or heat exchangers are ordered after diagnosis. Give the make, model, and year of the boiler when booking so the technician arrives prepared.

Other services in Drobeta-Turnu Severin

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling