Electrical Panel Installation in Pitești

About this service

A properly installed consumer unit gives you real protection, not just the appearance of safety. The electrician separates circuits so that a fault at one socket doesn't leave the whole house without power, fits a 30 mA residual current device to protect people, selects breakers sized to the cable cross-section rather than to the desired load, and tightens every connection to the specified torque, because a loose terminal heats up and becomes dangerous over time. At handover, the board is labelled and accompanied by a schematic, so any future work can be done quickly and safely.

Electrical Panel Installation in Pitești, Argeș

Pitești is one of the main towns in Argeș county, in the historical region of Muntenia. Many professionals working here also cover nearby localities such as Mioveni, Curtea de Argeș, Câmpulung, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Argeș

Argeș County, traversed by the Southern Carpathians, has its capital at Pitești — Romania's most important automotive industry hub, home to the Dacia/Renault platform. With a population of nearly 600,000 and towns such as Curtea de Argeș, Câmpulung, and Mioveni, the county combines heavy industry with a remarkable cultural and natural heritage. Proximity to Bucharest and easy access via the A1 motorway make Argeș an attractive county for investment and the labor market.

Estimated Prices — Electrical Panel Installation in Pitești

Service	Estimated Price
Flat consumer unit (8–12 circuits)	800–1,800 RON
House consumer unit (16–24 circuits)	1,500–3,500 RON
Replacing rewireable fuses with breakers	350–800 RON
Fitting a 30 mA RCD	150–320 RON
Installation testing and measurements	200–500 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Request separate quotes for labour and components — the quality of the protective devices matters a great deal
Choose components from established manufacturers; the price difference is small relative to the risk
Insist on a 30 mA RCD being fitted, even if the old installation didn't have one
Ask for every circuit to be clearly labelled and for a board schematic at handover
Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit
Request the test certificate with insulation resistance and earth electrode measurements

Frequently Asked Questions

Can a board be installed for an EV charging point?

Yes, but it requires a dedicated circuit with specially sized cable and protection, including a type B or A-EV RCD depending on the charger. The electrician first checks the available capacity in your supply contract; in many cases an application to increase the supply capacity is needed before installation.

How often should a consumer unit be inspected?

A visual inspection and retightening of connections is recommended every 2–3 years, and a full test with measurements every 5 years for homes. If you notice a smell of hot plastic, scorch marks, buzzing, or breakers that are warm to the touch, call an electrician immediately.

Will I be without power during the work?

Yes, but only temporarily. Replacing the board requires the supply to be off for a few hours, typically 3–6 hours in a flat. The electrician will tell you the window in advance so you can plan, and in some cases can keep a temporary circuit live.

How much does a consumer unit installation cost in Pitești?

For a flat with 8–12 circuits, labour typically falls between 500 and 1,800 RON, depending on area and complexity. For a house with 16–24 circuits, the cost rises to 900–3,500 RON. Components are added on top: enclosure, breakers, RCDs, and connection materials, which can mean another 400–1,500 RON.

How long does replacing a consumer unit take?

A flat board is usually replaced within a single working day, and a house board in 1–2 days. If circuits also need rewiring or a new supply cable pulling in, this can extend to 3–4 days. The supply is only interrupted for the duration of the actual work.

Do I need a licensed electrician?

Yes. Work on the consumer unit and the installation must be carried out by a licensed electrician. Licensing matters both for safety and for situations where documentation is needed for the energy supplier, for insurance, or when selling the property. Ask for the licence number and verify it.

Other services in Pitești

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Argeș

Mioveni Curtea de Argeș Câmpulung Valea Iașului Berevoești Domnești Albeștii de Argeș