Electrical Panel Installation in Gherla

About this service

A properly installed consumer unit gives you real protection, not just the appearance of safety. The electrician separates circuits so that a fault at one socket doesn't leave the whole house without power, fits a 30 mA residual current device to protect people, selects breakers sized to the cable cross-section rather than to the desired load, and tightens every connection to the specified torque, because a loose terminal heats up and becomes dangerous over time. At handover, the board is labelled and accompanied by a schematic, so any future work can be done quickly and safely.

Electrical Panel Installation in Gherla, Cluj

Gherla is one of the main towns in Cluj county, in the historical region of Transylvania. Many professionals working here also cover nearby localities such as Cluj-Napoca, Câmpia Turzii, Turda, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Cluj

Cluj County, with its capital at Cluj-Napoca — the largest IT and university hub in Transylvania, with nearly 320,000 inhabitants — is one of Romania's most important economic growth poles. The county's economy is diversified, with a European-scale technology and outsourcing services sector alongside industry, agriculture, and active cultural tourism. The labor market is highly competitive, and demand for professional services at all levels is among the highest in the country.

Estimated Prices — Electrical Panel Installation in Gherla

Service	Estimated Price
Flat consumer unit (8–12 circuits)	800–1,800 RON
House consumer unit (16–24 circuits)	1,500–3,500 RON
Replacing rewireable fuses with breakers	350–800 RON
Fitting a 30 mA RCD	150–320 RON
Installation testing and measurements	200–500 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Insist on a 30 mA RCD being fitted, even if the old installation didn't have one
Ask for every circuit to be clearly labelled and for a board schematic at handover
Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit
Request the test certificate with insulation resistance and earth electrode measurements
Don't accept oversized breakers as a fix for repeated tripping — the cause must be identified
Ask for the electrician's licence number and verify it before work begins

Frequently Asked Questions

Can I replace a breaker myself?

It isn't advisable. Even though the operation looks simple, working in the board requires correctly identifying the circuit, choosing a rating matched to the cable cross-section, and tightening connections to the right torque. An oversized breaker lets the cable overheat without tripping, which is exactly the scenario that starts fires.

What does it mean that my board is undersized?

It means the number of circuits or the rating of the protective devices no longer matches your actual appliances. Many homes built decades ago have 4–6 circuits, insufficient for a washing machine, electric oven, hob, air conditioning, and boiler. The result is repeated tripping and overheating connections.

Does the wiring need replacing when I replace the board?

Not always. If existing circuits have adequate cross-section and the insulation is sound, a new board can be fitted to the existing wiring. The electrician will measure insulation resistance first, though, and if values are poor or the cables are old aluminium, the correct recommendation is to rewire.

What is earthing and why does it matter at the board?

Earthing conducts fault currents to ground, allowing protective devices to trip quickly. Without a functioning earth electrode, the RCD cannot do its job in every situation. During installation, the electrician measures the earth electrode resistance, and the value must fall within regulatory limits.

How should circuits be grouped in a properly designed board?

The basic rule is separation by function: distinct circuits for lighting, for room sockets, for the kitchen, for the bathroom, and a dedicated circuit for each major appliance — hob, oven, washing machine, air conditioning, boiler. That way a fault affects only one area rather than the whole home.

Do I receive documentation after installation?

You should. Ask for the board schematic with numbered circuits, the test certificate with measured values — insulation resistance and earth electrode resistance — and the labour warranty. These documents are useful for any future work and may be requested by your insurer.

Other services in Gherla

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Cluj

Cluj-Napoca Câmpia Turzii Turda Dej