Electrical Panel Installation in Poian

About this service

A properly installed consumer unit gives you real protection, not just the appearance of safety. The electrician separates circuits so that a fault at one socket doesn't leave the whole house without power, fits a 30 mA residual current device to protect people, selects breakers sized to the cable cross-section rather than to the desired load, and tightens every connection to the specified torque, because a loose terminal heats up and becomes dangerous over time. At handover, the board is labelled and accompanied by a schematic, so any future work can be done quickly and safely.

Electrical Panel Installation in Poian, Covasna

Poian is a locality in Covasna county, in the historical region of Transylvania. Many professionals working here also cover nearby localities such as Târgu Secuiesc, Sfântu Gheorghe, Zagon, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Covasna

Covasna County, part of the Székely Land in central Transylvania, has its capital at Sfântu Gheorghe and a population of around 200,000 inhabitants, predominantly of Hungarian ethnicity. The local economy makes use of the region's forestry resources and renowned mineral waters, alongside a long-standing spa and mountain tourism tradition. The timber industry, small-scale processing, and traditional crafts round out the economic profile of this county with a distinctive cultural identity.

Estimated Prices — Electrical Panel Installation in Poian

Service	Estimated Price
Flat consumer unit (8–12 circuits)	650–1,400 RON
House consumer unit (16–24 circuits)	1,200–2,800 RON
Replacing rewireable fuses with breakers	280–650 RON
Fitting a 30 mA RCD	120–260 RON
Installation testing and measurements	150–400 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Insist on a 30 mA RCD being fitted, even if the old installation didn't have one
Ask for every circuit to be clearly labelled and for a board schematic at handover
Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit
Request the test certificate with insulation resistance and earth electrode measurements
Don't accept oversized breakers as a fix for repeated tripping — the cause must be identified
Ask for the electrician's licence number and verify it before work begins

Frequently Asked Questions

How long does replacing a consumer unit take?

A flat board is usually replaced within a single working day, and a house board in 1–2 days. If circuits also need rewiring or a new supply cable pulling in, this can extend to 3–4 days. The supply is only interrupted for the duration of the actual work.

Do I need a licensed electrician?

Yes. Work on the consumer unit and the installation must be carried out by a licensed electrician. Licensing matters both for safety and for situations where documentation is needed for the energy supplier, for insurance, or when selling the property. Ask for the licence number and verify it.

What is an RCD and why do I need one?

A residual current device detects current leaking to earth — including through a person's body — and cuts the supply within milliseconds. A 30 mA RCD is the standard protection for homes and is mandatory in modern installations, particularly for bathroom and kitchen circuits.

Why do my breakers keep tripping in Poian?

The most common causes are overload — too many appliances on one circuit — a short circuit in an appliance or socket, moisture in a junction box, and sometimes an undersized or worn breaker. An electrician in Poian identifies the problem circuit through testing and determines whether a simple adjustment or a resized board is needed.

Can I replace a breaker myself?

It isn't advisable. Even though the operation looks simple, working in the board requires correctly identifying the circuit, choosing a rating matched to the cable cross-section, and tightening connections to the right torque. An oversized breaker lets the cable overheat without tripping, which is exactly the scenario that starts fires.

What does it mean that my board is undersized?

It means the number of circuits or the rating of the protective devices no longer matches your actual appliances. Many homes built decades ago have 4–6 circuits, insufficient for a washing machine, electric oven, hob, air conditioning, and boiler. The result is repeated tripping and overheating connections.

Other services in Poian

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Covasna

Târgu Secuiesc Sfântu Gheorghe Zagon Covasna Baraolt Sânzieni Turia Dalnic Estelnic Lemnia Mereni Vârghiș Tinoasa Chilieni Valea Mare