Electrical Panel Installation in Șiacu

Looking for an electrician for your board in Șiacu? From swapping out rewireable fuses to a fully equipped consumer unit, on SmallJobs you'll find licensed tradespeople in the Șiacu area, Gorj county, ready to give you a price.

Post a Job for Free
✓ Free platform
✓ Verified professionals
✓ Quick response

About this service

A properly installed consumer unit gives you real protection, not just the appearance of safety. The electrician separates circuits so that a fault at one socket doesn't leave the whole house without power, fits a 30 mA residual current device to protect people, selects breakers sized to the cable cross-section rather than to the desired load, and tightens every connection to the specified torque, because a loose terminal heats up and becomes dangerous over time. At handover, the board is labelled and accompanied by a schematic, so any future work can be done quickly and safely.

Electrical Panel Installation in Șiacu, Gorj

Șiacu is a locality in Gorj county, in the historical region of Oltenia. Many professionals working here also cover nearby localities such as Motru, Târgu Jiu, Runcu, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Gorj

Gorj County, in northern Oltenia, has its capital at Târgu Jiu — the city where Constantin Brâncuși left his monumental outdoor artwork. The county's economy has long been dominated by coal mining and thermal energy in the Motru-Rovinari area, but is undergoing a transition toward diversification. The Brâncuși cultural heritage, mountain tourism, and local services represent the growth directions for an economy in the process of reinvention.

Estimated Prices — Electrical Panel Installation in Șiacu

Service Estimated Price
Flat consumer unit (8–12 circuits) 650–1,400 RON
House consumer unit (16–24 circuits) 1,200–2,800 RON
Replacing rewireable fuses with breakers 280–650 RON
Fitting a 30 mA RCD 120–260 RON
Installation testing and measurements 150–400 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Frequently Asked Questions

How should circuits be grouped in a properly designed board?
The basic rule is separation by function: distinct circuits for lighting, for room sockets, for the kitchen, for the bathroom, and a dedicated circuit for each major appliance — hob, oven, washing machine, air conditioning, boiler. That way a fault affects only one area rather than the whole home.
Do I receive documentation after installation?
You should. Ask for the board schematic with numbered circuits, the test certificate with measured values — insulation resistance and earth electrode resistance — and the labour warranty. These documents are useful for any future work and may be requested by your insurer.
Can a board be installed for an EV charging point?
Yes, but it requires a dedicated circuit with specially sized cable and protection, including a type B or A-EV RCD depending on the charger. The electrician first checks the available capacity in your supply contract; in many cases an application to increase the supply capacity is needed before installation.
How often should a consumer unit be inspected?
A visual inspection and retightening of connections is recommended every 2–3 years, and a full test with measurements every 5 years for homes. If you notice a smell of hot plastic, scorch marks, buzzing, or breakers that are warm to the touch, call an electrician immediately.
Will I be without power during the work?
Yes, but only temporarily. Replacing the board requires the supply to be off for a few hours, typically 3–6 hours in a flat. The electrician will tell you the window in advance so you can plan, and in some cases can keep a temporary circuit live.
How much does a consumer unit installation cost in Șiacu?
For a flat with 8–12 circuits, labour typically falls between 500 and 1,800 RON, depending on area and complexity. For a house with 16–24 circuits, the cost rises to 900–3,500 RON. Components are added on top: enclosure, breakers, RCDs, and connection materials, which can mean another 400–1,500 RON.

Other services in Șiacu

Electrical Panel Installation in other locations in Gorj

Find a trusted professional

Post for free and receive offers from verified professionals in your area.

Get Started — It's Free!
Offer services? Register as a professional