Electrical Panel Installation in Mediaș

About this service

A properly installed consumer unit gives you real protection, not just the appearance of safety. The electrician separates circuits so that a fault at one socket doesn't leave the whole house without power, fits a 30 mA residual current device to protect people, selects breakers sized to the cable cross-section rather than to the desired load, and tightens every connection to the specified torque, because a loose terminal heats up and becomes dangerous over time. At handover, the board is labelled and accompanied by a schematic, so any future work can be done quickly and safely.

Electrical Panel Installation in Mediaș, Sibiu

Mediaș is one of the main towns in Sibiu county, in the historical region of Transylvania. Many professionals working here also cover nearby localities such as Sibiu, Poplaca, Șura Mare, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Sibiu

Sibiu County, in central Transylvania, has in Sibiu — European Cultural Capital in 2007, with around 170,000 inhabitants — one of Romania's most attractive and competitive cities. Alongside a top-tier cultural tourism offering and the processing industry in Mediaș and Cisnădie, the county hosts a rapidly growing IT and outsourcing sector and numerous international companies. High quality of life, modern infrastructure, and the region's Saxon heritage consistently place Sibiu among the top counties for investment and labor attractiveness.

Estimated Prices — Electrical Panel Installation in Mediaș

Service	Estimated Price
Flat consumer unit (8–12 circuits)	800–1,800 RON
House consumer unit (16–24 circuits)	1,500–3,500 RON
Replacing rewireable fuses with breakers	350–800 RON
Fitting a 30 mA RCD	150–320 RON
Installation testing and measurements	200–500 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Request separate quotes for labour and components — the quality of the protective devices matters a great deal
Choose components from established manufacturers; the price difference is small relative to the risk
Insist on a 30 mA RCD being fitted, even if the old installation didn't have one
Ask for every circuit to be clearly labelled and for a board schematic at handover
Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit
Request the test certificate with insulation resistance and earth electrode measurements

Frequently Asked Questions

How long does replacing a consumer unit take?

A flat board is usually replaced within a single working day, and a house board in 1–2 days. If circuits also need rewiring or a new supply cable pulling in, this can extend to 3–4 days. The supply is only interrupted for the duration of the actual work.

Do I need a licensed electrician?

Yes. Work on the consumer unit and the installation must be carried out by a licensed electrician. Licensing matters both for safety and for situations where documentation is needed for the energy supplier, for insurance, or when selling the property. Ask for the licence number and verify it.

What is an RCD and why do I need one?

A residual current device detects current leaking to earth — including through a person's body — and cuts the supply within milliseconds. A 30 mA RCD is the standard protection for homes and is mandatory in modern installations, particularly for bathroom and kitchen circuits.

Why do my breakers keep tripping in Mediaș?

The most common causes are overload — too many appliances on one circuit — a short circuit in an appliance or socket, moisture in a junction box, and sometimes an undersized or worn breaker. An electrician in Mediaș identifies the problem circuit through testing and determines whether a simple adjustment or a resized board is needed.

Can I replace a breaker myself?

It isn't advisable. Even though the operation looks simple, working in the board requires correctly identifying the circuit, choosing a rating matched to the cable cross-section, and tightening connections to the right torque. An oversized breaker lets the cable overheat without tripping, which is exactly the scenario that starts fires.

What does it mean that my board is undersized?

It means the number of circuits or the rating of the protective devices no longer matches your actual appliances. Many homes built decades ago have 4–6 circuits, insufficient for a washing machine, electric oven, hob, air conditioning, and boiler. The result is repeated tripping and overheating connections.

Other services in Mediaș

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Sibiu

Sibiu Poplaca Șura Mare