Electrical Panel Installation in Malu

About this service

The consumer unit is the heart of any electrical installation in a home or commercial space: every circuit runs from it, and it houses the protective devices that stop a short circuit or overload before it can start a fire. Installing a consumer unit involves correctly sizing the circuit breakers against the connected loads, selecting appropriate residual current devices, grouping circuits for sockets, lighting, and heavy appliances, making the neutral and earth connections, clearly labelling every circuit, and carrying out final testing with specialist instruments. A licensed electrician calculates the installed load, checks the cross-section of existing conductors, and installs a board that complies with wiring regulations and the utility provider's requirements. Whether you're replacing an old fuse board, wiring a new house, or adding circuits for a boiler or an EV charging point, SmallJobs connects you with licensed electricians with real reviews and competitive rates.

Electrical Panel Installation in Malu, Vâlcea

Malu is a locality in Vâlcea county, in the historical region of Oltenia. Many professionals working here also cover nearby localities such as Râmnicu Vâlcea, Mlăceni, Predești, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Vâlcea

Vâlcea County, in northern Oltenia, has its capital at Râmnicu Vâlcea — a modern municipality on the Olt riverbank, with around 100,000 inhabitants and a traditional chemical industry represented by Oltchim. The renowned spa resorts — Băile Olănești, Călimănești-Căciulata, Ocnele Mari — make Vâlcea a county with a solid and valuable health tourism sector. Cozia National Park, historic monasteries, and mineral water resources round out the offering of a county with remarkable tourism and economic potential.

Estimated Prices — Electrical Panel Installation in Malu

Service	Estimated Price
Flat consumer unit (8–12 circuits)	650–1,400 RON
House consumer unit (16–24 circuits)	1,200–2,800 RON
Replacing rewireable fuses with breakers	280–650 RON
Fitting a 30 mA RCD	120–260 RON
Installation testing and measurements	150–400 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Ask for the electrician's licence number and verify it before work begins
Request separate quotes for labour and components — the quality of the protective devices matters a great deal
Choose components from established manufacturers; the price difference is small relative to the risk
Insist on a 30 mA RCD being fitted, even if the old installation didn't have one
Ask for every circuit to be clearly labelled and for a board schematic at handover
Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit

Frequently Asked Questions

What is earthing and why does it matter at the board?

Earthing conducts fault currents to ground, allowing protective devices to trip quickly. Without a functioning earth electrode, the RCD cannot do its job in every situation. During installation, the electrician measures the earth electrode resistance, and the value must fall within regulatory limits.

How should circuits be grouped in a properly designed board?

The basic rule is separation by function: distinct circuits for lighting, for room sockets, for the kitchen, for the bathroom, and a dedicated circuit for each major appliance — hob, oven, washing machine, air conditioning, boiler. That way a fault affects only one area rather than the whole home.

Do I receive documentation after installation?

You should. Ask for the board schematic with numbered circuits, the test certificate with measured values — insulation resistance and earth electrode resistance — and the labour warranty. These documents are useful for any future work and may be requested by your insurer.

Can a board be installed for an EV charging point?

Yes, but it requires a dedicated circuit with specially sized cable and protection, including a type B or A-EV RCD depending on the charger. The electrician first checks the available capacity in your supply contract; in many cases an application to increase the supply capacity is needed before installation.

How often should a consumer unit be inspected?

A visual inspection and retightening of connections is recommended every 2–3 years, and a full test with measurements every 5 years for homes. If you notice a smell of hot plastic, scorch marks, buzzing, or breakers that are warm to the touch, call an electrician immediately.

Will I be without power during the work?

Yes, but only temporarily. Replacing the board requires the supply to be off for a few hours, typically 3–6 hours in a flat. The electrician will tell you the window in advance so you can plan, and in some cases can keep a temporary circuit live.

Other services in Malu

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Vâlcea

Râmnicu Vâlcea Mlăceni Predești Mogești Prundeni Plesești Pleșoiu Rădăcinești Pietroasa Pietreni Păușa Tanislevi Țeica Târgu Gângulești Șușani