Apartment Electrical Wiring in Cintei

About this service

A properly rewired installation gives you peace of mind for the next 30–40 years. The electrician sizes each circuit to the load it feeds, uses copper conductors of 1.5 mm² for lighting, 2.5 mm² for sockets, and 4–6 mm² for heavy appliances, runs everything in conduit so a new cable can be pulled later, and separates circuits so a single fault doesn't leave the whole flat without power. Earthing is provided at every socket, and at completion the insulation resistance and the continuity of the protective conductor are measured, with the results recorded in writing.

Apartment Electrical Wiring in Cintei, Arad

Cintei is a locality in Arad county, in the historical region of Crișana. Many professionals working here also cover nearby localities such as Arad, Almaș, Apateu, so you can still receive offers when the right specialist is just around the corner.

Apartment Electrical Wiring in Arad

Arad County, located in western Romania at the border with Hungary, benefits from a dynamic economy due to its strategic position at the crossroads of European transport corridors. Arad municipality, with around 150,000 inhabitants, is an important industrial and commercial center, with industrial parks attracting investors from across Europe. Demand for professional services of all kinds continues to grow, supported by an active labor market and a vibrant business community.

Estimated Prices — Apartment Electrical Wiring in Cintei

Service	Estimated Price
Full rewire, studio flat	2,800–5,500 RON
Full rewire, 2-room flat	4,500–8,500 RON
Full rewire, 3–4 room flat	6,500–14,000 RON
New circuit (route, box, socket)	140–300 RON
Wall chasing (linear metre)	14–28 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a apartment electrical wiring

Plan socket and switch positions before the chasing starts — moving them later is expensive
Add 20–30% more sockets than you think you need; the marginal cost now is small
Ask for conductors to be run in conduit so new cables can be pulled in future
Run network cables now, even if you use wireless — you won't get another chance without opening walls
Request a plan of the cable routes so you know where it's safe to drill
Check that every socket has the protective conductor properly connected, not just contact to the housing

Frequently Asked Questions

What testing is done at the end?

The electrician measures insulation resistance on each circuit, verifies continuity of the protective conductor, tests RCD operation, and confirms correct polarity at the sockets. Results are recorded in a test certificate, which is worth keeping together with the installation schematic.

What warranty comes with a new installation?

Labour is typically warranted for 2–5 years, with components covered by the manufacturer's warranty. Request the warranty in writing and keep the quote, the schematic, and the test certificate — these are the documents that matter if a problem arises or when selling the flat.

Can I rewire in phases, room by room?

It's possible, but not ideal. The board and main circuits have to be redone in full anyway, and phasing means repeated dust and disruption plus a higher total cost. If budget requires phasing, prioritise the kitchen, bathroom, and the heavy-appliance circuits.

How much does rewiring a flat cost in Cintei?

For a two-room flat, labour typically falls between 4,500 and 11,000 RON, depending on area, circuit count, and wall construction. Materials — conductors, conduit, boxes, accessories, and consumer unit components — usually add another 2,000–5,000 RON. A proper quote lists them separately.

How long does a rewire take?

A two-room flat is usually done in 5–8 working days, and a three- or four-room flat in 8–14 days. Chasing walls and pulling cables takes the longest; accessories are fitted at the end, after decorating, which needs another 1–2 days.

Do I need to move out during the work?

Generally yes, at least for the chasing stage, which creates a great deal of dust and noise and leaves parts of the flat without power. If the work is phased you can stay, but comfort is significantly reduced. Most people combine a rewire with a full renovation.

Other services in Cintei

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Apartment Electrical Wiring in other locations in Arad

Arad Almaș Apateu Mădrigești Cărand Archiș Beliu Sintea Mare Buteni Macea Pâncota Peregu Mare Curtici Șilindia Grăniceri