Apartment Electrical Wiring in Onești

About this service

A properly rewired installation gives you peace of mind for the next 30–40 years. The electrician sizes each circuit to the load it feeds, uses copper conductors of 1.5 mm² for lighting, 2.5 mm² for sockets, and 4–6 mm² for heavy appliances, runs everything in conduit so a new cable can be pulled later, and separates circuits so a single fault doesn't leave the whole flat without power. Earthing is provided at every socket, and at completion the insulation resistance and the continuity of the protective conductor are measured, with the results recorded in writing.

Apartment Electrical Wiring in Onești, Bacău

Onești is one of the main towns in Bacău county, in the historical region of Moldavia. Many professionals working here also cover nearby localities such as Moinești, Bacău, Cașin, so you can still receive offers when the right specialist is just around the corner.

Apartment Electrical Wiring in Bacău

Bacău County, located east of the Carpathians in the heart of Moldova, has its capital at Bacău — an important industrial and university center with approximately 170,000 inhabitants. Towns such as Onești and Moinești have built a strong tradition in the petrochemical and processing industries, while the rural areas offer diversified agriculture. The county stands out for an active services market and the presence of several higher education institutions that continually feed the labor market.

Estimated Prices — Apartment Electrical Wiring in Onești

Service	Estimated Price
Full rewire, studio flat	3,500–7,000 RON
Full rewire, 2-room flat	5,500–11,000 RON
Full rewire, 3–4 room flat	8,000–18,000 RON
New circuit (route, box, socket)	180–380 RON
Wall chasing (linear metre)	18–35 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a apartment electrical wiring

Request a plan of the cable routes so you know where it's safe to drill
Check that every socket has the protective conductor properly connected, not just contact to the housing
Ask for the final test certificate and keep it together with the warranty
Ask for the electrician's licence number and verify it before signing the quote
Plan socket and switch positions before the chasing starts — moving them later is expensive
Add 20–30% more sockets than you think you need; the marginal cost now is small

Frequently Asked Questions

What should an electrician's quote contain?

A proper quote lists the number of circuits, route lengths, conductor type and cross-section, the number of junction boxes and accessory points, consumer unit components, and labour separately from materials. Also ask for a route plan, so you know in future where not to drill.

Do I need approval from the building association?

For work inside the flat, approval is generally not required, but associations often ask for advance notice because of noise and working hours. If the work touches the common riser or the meter, the association's consent — and sometimes the supplier's — is mandatory.

What testing is done at the end?

The electrician measures insulation resistance on each circuit, verifies continuity of the protective conductor, tests RCD operation, and confirms correct polarity at the sockets. Results are recorded in a test certificate, which is worth keeping together with the installation schematic.

What warranty comes with a new installation?

Labour is typically warranted for 2–5 years, with components covered by the manufacturer's warranty. Request the warranty in writing and keep the quote, the schematic, and the test certificate — these are the documents that matter if a problem arises or when selling the flat.

Can I rewire in phases, room by room?

It's possible, but not ideal. The board and main circuits have to be redone in full anyway, and phasing means repeated dust and disruption plus a higher total cost. If budget requires phasing, prioritise the kitchen, bathroom, and the heavy-appliance circuits.

How much does rewiring a flat cost in Onești?

For a two-room flat, labour typically falls between 4,500 and 11,000 RON, depending on area, circuit count, and wall construction. Materials — conductors, conduit, boxes, accessories, and consumer unit components — usually add another 2,000–5,000 RON. A proper quote lists them separately.

Other services in Onești

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Apartment Electrical Wiring in other locations in Bacău

Moinești Bacău Cașin Buhuși Comănești Dărmănești Târgu Ocna Slănic-Moldova Mănăstirea Cașin