Apartment Electrical Wiring in Bistrița

About this service

Rewiring a flat means completely replacing the circuits, from the consumer unit to the last socket, and it is one of the most important jobs in any renovation. A licensed electrician marks out the routes, chases the walls, fits conduit and junction boxes, pulls conductors of the correct cross-section, makes the connections in the boxes, fits the accessories — sockets, switches, light fittings — equips the consumer unit, and tests everything before energising. Dedicated circuits are added for heavy appliances, extra sockets go where you actually need them, and increasingly so do data cables, USB outlets, or provision for smart systems. Installations in blocks built decades ago use undersized aluminium conductors with no earth, and the risk grows as new appliances are added. On SmallJobs you'll find licensed electricians with real reviews and competitive rates.

Apartment Electrical Wiring in Bistrița, Bistrița-Năsăud

Bistrița is one of the main towns in Bistrița-Năsăud county, in the historical region of Transylvania. Many professionals working here also cover nearby localities such as Rodna, Șanț, so you can still receive offers when the right specialist is just around the corner.

Apartment Electrical Wiring in Bistrița-Năsăud

Bistrița-Năsăud County, located in northern Transylvania, has its capital at Bistrița — a medieval town with a modernizing economy. With approximately 280,000 inhabitants, the county makes use of its forestry and agricultural resources, alongside growing tourism tied to mountain landscapes and the Năsăud area. The timber industry, food processing, and small entrepreneurial businesses form the pillars of the local economy.

Estimated Prices — Apartment Electrical Wiring in Bistrița

Service	Estimated Price
Full rewire, studio flat	3,500–7,000 RON
Full rewire, 2-room flat	5,500–11,000 RON
Full rewire, 3–4 room flat	8,000–18,000 RON
New circuit (route, box, socket)	180–380 RON
Wall chasing (linear metre)	18–35 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a apartment electrical wiring

Run network cables now, even if you use wireless — you won't get another chance without opening walls
Request a plan of the cable routes so you know where it's safe to drill
Check that every socket has the protective conductor properly connected, not just contact to the housing
Ask for the final test certificate and keep it together with the warranty
Ask for the electrician's licence number and verify it before signing the quote
Plan socket and switch positions before the chasing starts — moving them later is expensive

Frequently Asked Questions

Do I need to move out during the work?

Generally yes, at least for the chasing stage, which creates a great deal of dust and noise and leaves parts of the flat without power. If the work is phased you can stay, but comfort is significantly reduced. Most people combine a rewire with a full renovation.

Why does aluminium wiring need replacing?

Aluminium conducts less well than copper, oxidises at connections over time, and becomes brittle, which leads to terminals that overheat. Many older installations are also undersized, with 1.5 mm² on socket circuits, and have no protective conductor. That combination is why a full rewire is the standard recommendation.

What does it mean that my flat has no earth in Bistrița?

It means the sockets have only two conductors, live and neutral, without the third protective conductor. Without it, a fault can leave an appliance casing live, and the protective devices won't reliably trip. In Bistrița blocks built before the 1990s this is common and can only be resolved by rewiring.

What cable size is used for each circuit?

The usual standard is 1.5 mm² copper for lighting circuits, 2.5 mm² for general sockets, and 4 or 6 mm² for heavy appliances such as an electric hob, water heater, or air conditioning. The cross-section is always matched to the breaker rating in the board, never the other way round.

How many sockets should each room have?

A practical rule is a minimum of 4–6 sockets in a living room, 4 in a bedroom, and 6–10 in a kitchen, where the appliance load is highest. It's worth adding extras from the start: one more socket during the work costs very little compared to opening walls again a few years later.

Can cables be installed without chasing the walls?

There are alternatives: surface-mounted PVC trunking, running above a plasterboard ceiling, or pulling through existing conduit if it's clear and sound. Each has aesthetic or practical limitations. Chasing into the wall remains the standard approach in a full renovation.

Other services in Bistrița

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Apartment Electrical Wiring in other locations in Bistrița-Năsăud

Rodna Șanț