Electrical Panel Installation in Cașin

About this service

A properly installed consumer unit gives you real protection, not just the appearance of safety. The electrician separates circuits so that a fault at one socket doesn't leave the whole house without power, fits a 30 mA residual current device to protect people, selects breakers sized to the cable cross-section rather than to the desired load, and tightens every connection to the specified torque, because a loose terminal heats up and becomes dangerous over time. At handover, the board is labelled and accompanied by a schematic, so any future work can be done quickly and safely.

Electrical Panel Installation in Cașin, Bacău

Cașin is a locality in Bacău county, in the historical region of Moldavia. Many professionals working here also cover nearby localities such as Moinești, Onești, Bacău, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Bacău

Bacău County, located east of the Carpathians in the heart of Moldova, has its capital at Bacău — an important industrial and university center with approximately 170,000 inhabitants. Towns such as Onești and Moinești have built a strong tradition in the petrochemical and processing industries, while the rural areas offer diversified agriculture. The county stands out for an active services market and the presence of several higher education institutions that continually feed the labor market.

Estimated Prices — Electrical Panel Installation in Cașin

Service	Estimated Price
Flat consumer unit (8–12 circuits)	650–1,400 RON
House consumer unit (16–24 circuits)	1,200–2,800 RON
Replacing rewireable fuses with breakers	280–650 RON
Fitting a 30 mA RCD	120–260 RON
Installation testing and measurements	150–400 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit
Request the test certificate with insulation resistance and earth electrode measurements
Don't accept oversized breakers as a fix for repeated tripping — the cause must be identified
Ask for the electrician's licence number and verify it before work begins
Request separate quotes for labour and components — the quality of the protective devices matters a great deal
Choose components from established manufacturers; the price difference is small relative to the risk

Frequently Asked Questions

How should circuits be grouped in a properly designed board?

The basic rule is separation by function: distinct circuits for lighting, for room sockets, for the kitchen, for the bathroom, and a dedicated circuit for each major appliance — hob, oven, washing machine, air conditioning, boiler. That way a fault affects only one area rather than the whole home.

Do I receive documentation after installation?

You should. Ask for the board schematic with numbered circuits, the test certificate with measured values — insulation resistance and earth electrode resistance — and the labour warranty. These documents are useful for any future work and may be requested by your insurer.

Can a board be installed for an EV charging point?

Yes, but it requires a dedicated circuit with specially sized cable and protection, including a type B or A-EV RCD depending on the charger. The electrician first checks the available capacity in your supply contract; in many cases an application to increase the supply capacity is needed before installation.

How often should a consumer unit be inspected?

A visual inspection and retightening of connections is recommended every 2–3 years, and a full test with measurements every 5 years for homes. If you notice a smell of hot plastic, scorch marks, buzzing, or breakers that are warm to the touch, call an electrician immediately.

Will I be without power during the work?

Yes, but only temporarily. Replacing the board requires the supply to be off for a few hours, typically 3–6 hours in a flat. The electrician will tell you the window in advance so you can plan, and in some cases can keep a temporary circuit live.

How much does a consumer unit installation cost in Cașin?

For a flat with 8–12 circuits, labour typically falls between 500 and 1,800 RON, depending on area and complexity. For a house with 16–24 circuits, the cost rises to 900–3,500 RON. Components are added on top: enclosure, breakers, RCDs, and connection materials, which can mean another 400–1,500 RON.

Other services in Cașin

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Bacău

Moinești Onești Bacău Buhuși Comănești Dărmănești Târgu Ocna Slănic-Moldova Mănăstirea Cașin