Electrical Panel Installation in Onești

About this service

The consumer unit is the heart of any electrical installation in a home or commercial space: every circuit runs from it, and it houses the protective devices that stop a short circuit or overload before it can start a fire. Installing a consumer unit involves correctly sizing the circuit breakers against the connected loads, selecting appropriate residual current devices, grouping circuits for sockets, lighting, and heavy appliances, making the neutral and earth connections, clearly labelling every circuit, and carrying out final testing with specialist instruments. A licensed electrician calculates the installed load, checks the cross-section of existing conductors, and installs a board that complies with wiring regulations and the utility provider's requirements. Whether you're replacing an old fuse board, wiring a new house, or adding circuits for a boiler or an EV charging point, SmallJobs connects you with licensed electricians with real reviews and competitive rates.

Electrical Panel Installation in Onești, Bacău

Onești is one of the main towns in Bacău county, in the historical region of Moldavia. Many professionals working here also cover nearby localities such as Moinești, Bacău, Cașin, so you can still receive offers when the right specialist is just around the corner.

Electrical Panel Installation in Bacău

Bacău County, located east of the Carpathians in the heart of Moldova, has its capital at Bacău — an important industrial and university center with approximately 170,000 inhabitants. Towns such as Onești and Moinești have built a strong tradition in the petrochemical and processing industries, while the rural areas offer diversified agriculture. The county stands out for an active services market and the presence of several higher education institutions that continually feed the labor market.

Estimated Prices — Electrical Panel Installation in Onești

Service	Estimated Price
Flat consumer unit (8–12 circuits)	800–1,800 RON
House consumer unit (16–24 circuits)	1,500–3,500 RON
Replacing rewireable fuses with breakers	350–800 RON
Fitting a 30 mA RCD	150–320 RON
Installation testing and measurements	200–500 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical panel installation

Ask for the electrician's licence number and verify it before work begins
Request separate quotes for labour and components — the quality of the protective devices matters a great deal
Choose components from established manufacturers; the price difference is small relative to the risk
Insist on a 30 mA RCD being fitted, even if the old installation didn't have one
Ask for every circuit to be clearly labelled and for a board schematic at handover
Check that each major appliance — hob, oven, boiler, air conditioning — has its own dedicated circuit

Frequently Asked Questions

Why do my breakers keep tripping in Onești?

The most common causes are overload — too many appliances on one circuit — a short circuit in an appliance or socket, moisture in a junction box, and sometimes an undersized or worn breaker. An electrician in Onești identifies the problem circuit through testing and determines whether a simple adjustment or a resized board is needed.

Can I replace a breaker myself?

It isn't advisable. Even though the operation looks simple, working in the board requires correctly identifying the circuit, choosing a rating matched to the cable cross-section, and tightening connections to the right torque. An oversized breaker lets the cable overheat without tripping, which is exactly the scenario that starts fires.

What does it mean that my board is undersized?

It means the number of circuits or the rating of the protective devices no longer matches your actual appliances. Many homes built decades ago have 4–6 circuits, insufficient for a washing machine, electric oven, hob, air conditioning, and boiler. The result is repeated tripping and overheating connections.

Does the wiring need replacing when I replace the board?

Not always. If existing circuits have adequate cross-section and the insulation is sound, a new board can be fitted to the existing wiring. The electrician will measure insulation resistance first, though, and if values are poor or the cables are old aluminium, the correct recommendation is to rewire.

What is earthing and why does it matter at the board?

Earthing conducts fault currents to ground, allowing protective devices to trip quickly. Without a functioning earth electrode, the RCD cannot do its job in every situation. During installation, the electrician measures the earth electrode resistance, and the value must fall within regulatory limits.

How should circuits be grouped in a properly designed board?

The basic rule is separation by function: distinct circuits for lighting, for room sockets, for the kitchen, for the bathroom, and a dedicated circuit for each major appliance — hob, oven, washing machine, air conditioning, boiler. That way a fault affects only one area rather than the whole home.

Other services in Onești

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Panel Installation in other locations in Bacău

Moinești Bacău Cașin Buhuși Comănești Dărmănești Târgu Ocna Slănic-Moldova Mănăstirea Cașin