Electrical Systems in Tătaru

About this service

A well-designed electrical installation is rarely noticed and constantly felt: breakers don't trip when two large appliances start, sockets don't get warm, and the RCD actually trips when it should. The electrician sizes circuits against the real installed load, puts the kitchen, bathroom, and boiler on their own circuits, fits 30 mA residual current protection in wet areas, and checks the earthing. This category also covers distribution boards for houses and apartment blocks, supplies for boilers and heat pumps, circuits for EV chargers, exterior lighting, and extra-low-voltage installations. On SmallJobs you'll find electricians and companies who do the work and hand over the diagram and the test certificates.

Electrical Systems in Tătaru, Prahova

Tătaru is a locality in Prahova county, in the historical region of Muntenia. Many professionals working here also cover nearby localities such as Ploiești, Câmpina, Bertea, so you can still receive offers when the right specialist is just around the corner.

Electrical Systems in Prahova

Prahova County, at the foot of the Carpathians, has in Ploiești — with around 200,000 inhabitants — the traditional capital of the Romanian petroleum industry and an important economic center in proximity to Bucharest. Câmpina, Sinaia, Bușteni, and other localities in the Prahova Valley round out a county with an extremely diversified economy: oil and chemicals, mountain and ski tourism, agriculture, and a well-developed services sector. Easy access via the A3 and DN1 makes Prahova a strategic county in the national road infrastructure.

Estimated Prices — Electrical Systems in Tătaru

Service	Estimated Price
Apartment distribution board (8-12 circuits)	600–1,300 RON
Full rewiring, two-room apartment	3,500–6,500 RON
New socket or lighting circuit	130–260 RON
Earthing electrode and measurements	800–1,700 RON
Installation inspection and test certificate	300–700 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a electrical systems

Photograph the cable routes before plastering — it saves surprises on the next job
Check whether the quote includes materials or labour only
Get connection approval before adding large loads
Ask for the electrician's ANRE certificate before signing the contract
Request the circuit schedule before work starts, not afterwards
Don't accept handover without the measurement certificate

Frequently Asked Questions

Do I need approval to increase my installed capacity?

Yes. Exceeding the capacity approved in your contract requires a technical connection approval from the distribution operator. It is the mandatory step before fitting an EV charger or a heat pump.

What warranty applies to electrical work?

The usual workmanship warranty is 12-24 months. The equipment — breakers, RCDs, boards — carries the manufacturer's warranty, typically 2-5 years.

Can the electrical installation be done in stages in Tătaru?

Yes, especially in houses, where the main supply and board can be done first and the zone circuits later. What matters is that the overall scheme is planned from the start, so routes don't have to be redone.

How much does a new electrical installation cost in Tătaru?

For a two-room apartment, a full installation generally costs 3,500-7,500 RON in Tătaru, labour and materials, depending on the number of circuits and the type of board. The quote is drawn up from the circuit schedule, not from floor area.

Does the electrician need an ANRE certificate?

For work on utilisation installations connected to the grid, yes. The ANRE certificate is what allows the work to be carried out legally and the verification documents to be issued. Ask for it before starting.

What is residual current protection and why do I need it?

An RCD disconnects the circuit when it detects current leaking to earth — precisely the situation where someone touches a live conductor. It is mandatory on circuits in wet areas, with 30 mA sensitivity.

Other services in Tătaru

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Electrical Systems in other locations in Prahova

Ploiești Câmpina Bertea Cărbunești Coada Izvorului Călugăreni Valea Scheilor Rachieri Brebu Megieșesc Mănești Tinosu Valea Călugărească Tomșani Olteni Valea Stâlpului