Kitchen Renovation in Câmpina

About this service

The most common mistake in a kitchen renovation isn't technical but procedural: the plumbing and electrical work starts before the furniture design is finalised. The result is a socket hidden behind a unit, an extractor outlet that doesn't line up with the ducting, or a water connection emerging exactly where a drawer needs to sit. An experienced tradesperson asks for the furniture plan with exact dimensions first, then marks the final positions of sockets, connections, and the extract on the wall, confirming them with the client before breaking anything. The work area needs dedicated circuits for every major appliance, and an electric or induction hob requires large-section cable run directly from the board.

Kitchen Renovation in Câmpina, Prahova

Câmpina is one of the main towns in Prahova county, in the historical region of Muntenia. Many professionals working here also cover nearby localities such as Ploiești, Bertea, Cărbunești, so you can still receive offers when the right specialist is just around the corner.

Kitchen Renovation in Prahova

Prahova County, at the foot of the Carpathians, has in Ploiești — with around 200,000 inhabitants — the traditional capital of the Romanian petroleum industry and an important economic center in proximity to Bucharest. Câmpina, Sinaia, Bușteni, and other localities in the Prahova Valley round out a county with an extremely diversified economy: oil and chemicals, mountain and ski tourism, agriculture, and a well-developed services sector. Easy access via the A3 and DN1 makes Prahova a strategic county in the national road infrastructure.

Estimated Prices — Kitchen Renovation in Câmpina

Service	Estimated Price
Complete 8–12 sqm kitchen (labour)	8,000–18,000 RON
Strip out units and tiling, incl. removal	800–2,000 RON
Reworking water and waste pipework	1,200–3,000 RON
Dedicated electrical circuits (each)	250–500 RON
Kitchen unit installation (linear metre)	250–500 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a kitchen renovation

Mark the final socket and connection positions on the wall and confirm them before anything is cut
Insist on sealing the worktop cut-out edge, particularly on chipboard worktops
Check the extractor duct route before ordering wall units
Plan an alternative for cooking for 3–5 weeks, including furniture delivery
Book the licensed gas fitter early — it depends on their schedule, not yours
Finalise the furniture design before services work starts — it's the most expensive mistake to get wrong

Frequently Asked Questions

What electrical circuits does a kitchen need?

Ideally dedicated circuits for the hob, oven, dishwasher, fridge, and extractor, plus a separate circuit for worktop sockets. An electric or induction hob needs 4–6 mm² cable run directly from the board. A single circuit for the whole kitchen is insufficient and leads to repeated tripping.

Can the sink be moved elsewhere?

Yes, but relocating the waste is limited by the need for a continuous fall to the stack. In flats, the practical distance is 2–3 metres; beyond that the risk of repeated blockages rises. Moving the water supply is far simpler. Discuss this option before finalising the furniture plan.

Do I need tiling on the whole wall or just the work area?

Protection is only needed between the worktop and wall units, where splashes occur. You can use tiles, toughened glass, composite panel, or durable washable paint. The remaining walls are decorated normally. The choice affects cost as well as how easy it is to clean over time.

Who coordinates the renovation team with the furniture fitters?

That's your responsibility, unless you contract a single supplier for everything. In practice, the building team must complete finishes and services before the units are delivered, and the plumber returns after the units are installed to connect the sink and dishwasher.

Can the gas connection be moved in Câmpina?

Yes, but exclusively by a fitter licensed by the gas distributor, not by the renovation team. In Câmpina, as everywhere, any change to the gas installation requires inspection and documentation. Plan this operation early, because it depends on the licensed firm's schedule rather than yours.

Which worktop is best for a kitchen?

Laminated chipboard is the most affordable and offers many finishes, but is vulnerable to water at the edges. Composite and quartz resist moisture, scratches, and heat far better, at 3–5 times the price. Whatever the material, sealing the sink cut-out remains essential.

Other services in Câmpina

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Kitchen Renovation in other locations in Prahova

Ploiești Bertea Cărbunești Coada Izvorului Călugăreni Valea Scheilor Rachieri Brebu Megieșesc Mănești Tinosu Valea Călugărească Tomșani Olteni Valea Stâlpului Teișani