Sink Installation in Săulești

About this service

Fitting a sink looks like a simple job, but doing it properly requires preparation and attention to details that only show up months later. A professional plumber checks the position of existing connections, cuts or adjusts the worktop if needed, fits the tap to the sink before installation — far easier than afterwards — makes the hot and cold connections with quality flexible hoses, fits the trap with the correct seals, secures the sink to its cabinet, worktop, or wall depending on type, seals the perimeter with anti-mould sanitary silicone, and pressure-tests thoroughly to catch any leak. The service covers inset and top-mounted kitchen sinks, wall-hung and pedestal basins, double bowls, and replacing an old sink including removal. On SmallJobs you'll find experienced plumbers with real reviews and competitive rates.

Sink Installation in Săulești, Gorj

Săulești is a locality in Gorj county, in the historical region of Oltenia. Many professionals working here also cover nearby localities such as Motru, Târgu Jiu, Runcu, so you can still receive offers when the right specialist is just around the corner.

Sink Installation in Gorj

Gorj County, in northern Oltenia, has its capital at Târgu Jiu — the city where Constantin Brâncuși left his monumental outdoor artwork. The county's economy has long been dominated by coal mining and thermal energy in the Motru-Rovinari area, but is undergoing a transition toward diversification. The Brâncuși cultural heritage, mountain tourism, and local services represent the growth directions for an economy in the process of reinvention.

Estimated Prices — Sink Installation in Săulești

Service	Estimated Price
Kitchen sink fitted to worktop	140–300 RON
Wall-hung or pedestal basin	120–250 RON
Sink replacement incl. removing the old one	170–350 RON
Tap installation (separate)	70–160 RON
Worktop cut-out for inset sink	90–220 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a sink installation

Choose a trap with access for clearing, to avoid full dismantling at the first blockage
Agree in advance who disposes of the old sink, especially if it's cast iron
Buy the sink before calling the plumber so they can see the mounting type and dimensions
Ask for the tap to be fitted to the sink before installation — it's far easier and seals better
Insist on sealing the cut edge of a chipboard worktop, otherwise it swells over time
Check the condition of the isolating valves and replace them now if they're old or seized

Frequently Asked Questions

Can a new sink be fitted to the old connections?

In most cases yes, if the connection positions suit the new sink and the isolating valves work. The plumber checks their condition first; old valves that are seized or dripping must be replaced, otherwise the next repair becomes an emergency.

Why does it smell of drains after installation?

The most common reason is a trap fitted incorrectly or without a water seal, letting drain gases rise. Other causes are a leaking seal at the stack connection or a dried-out trap if the sink hasn't been used for a while. A plumber checks the fall and the tightness of the joints.

What kind of trap is better?

A plastic trap is cheap, easy to dismantle for cleaning, and adequate for most situations. A chromed metal one looks better on wall-hung basins where it remains visible, but is harder to clean. What matters is that the chosen model has a water seal and access for clearing blockages.

How long should I wait before using the sink?

You can use it immediately for brief use, but sanitary silicone needs 12–24 hours to cure fully. During that time avoid soaking the sealed perimeter, otherwise the bead won't adhere properly and will lift within months.

Can a sink be fitted into a chipboard worktop?

Yes, that's the most common situation in kitchens. The cut edge must be sealed without fail, with silicone or a special lacquer, because chipboard absorbs water and swells irreversibly. This is the most frequent hidden defect in rushed installations.

Does the plumber remove the old sink in Săulești?

Removal is usually included, but transporting and disposing of the old sink is often charged separately. Some tradespeople in Săulești will take it for a small fee, others leave it with the client. Clarify this when requesting a quote, particularly for cast iron sinks, which are very heavy.

Other services in Săulești

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Sink Installation in other locations in Gorj

Motru Târgu Jiu Runcu Samarinești Prigoria Roșia de Amaradia Călugăreasa Scoarța Negomir Padeș Mătăsari Plopșoru Peștișani Ionești Hurezani