Sink Installation in Șcheia

About this service

Most problems that appear after a sink is fitted share the same origin: a seal overtightened, a trap installed at the wrong fall, or silicone applied to a damp surface. An experienced plumber tightens connections hand-tight plus a quarter turn with a spanner and no more, because a forced thread cracks the plastic nut and starts dripping weeks later. The trap is fitted with a continuous fall towards the stack, with no horizontal sections where residue collects, and the water seal must be maintained to block drain odours. Silicone sealing is done on a perfectly dry, degreased surface, otherwise the bead lifts within months and water reaches under the worktop, where it swells the chipboard beyond repair.

Sink Installation in Șcheia, Iași

Șcheia is a locality in Iași county, in the historical region of Moldavia. Many professionals working here also cover nearby localities such as Pașcani, Iași, Tansa (Belcești), so you can still receive offers when the right specialist is just around the corner.

Sink Installation in Iași

Iași County, with its capital in Iași municipality — with nearly 370,000 inhabitants, the most populous city in Moldova and one of Romania's major university centers — is an important cultural, academic, and economic hub of the country. Iași's renowned universities, a rapidly expanding IT sector, and a traditional pharmaceutical and processing industry place Iași among the most dynamic counties in the eastern part of the country. The services market is diversified and continuously developing, supported by a young and well-educated population.

Estimated Prices — Sink Installation in Șcheia

Service	Estimated Price
Kitchen sink fitted to worktop	140–300 RON
Wall-hung or pedestal basin	120–250 RON
Sink replacement incl. removing the old one	170–350 RON
Tap installation (separate)	70–160 RON
Worktop cut-out for inset sink	90–220 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a sink installation

Agree in advance who disposes of the old sink, especially if it's cast iron
Buy the sink before calling the plumber so they can see the mounting type and dimensions
Ask for the tap to be fitted to the sink before installation — it's far easier and seals better
Insist on sealing the cut edge of a chipboard worktop, otherwise it swells over time
Check the condition of the isolating valves and replace them now if they're old or seized
Don't soak the siliconed perimeter during the first 24 hours after installation

Frequently Asked Questions

How long does installation take?

A sink fitted to existing connections takes 1–2 hours. If the worktop needs cutting, connections need moving, or an old sink is stuck fast with cured silicone, the job can reach 3–4 hours. Silicone curing time adds another 12–24 hours before heavy use.

Does the plumber bring the necessary materials?

They usually bring consumables — sanitary silicone, PTFE tape, flexible hoses, seals — either included or invoiced separately at modest values. The sink, tap, and trap are bought by the client. Confirm what the tradesperson brings upfront so the job isn't halted for a missing part.

Should I buy the sink before calling the plumber?

Yes, that's recommended, so the tradesperson can see the mounting type and dimensions. Many plumbers will also do a measuring visit beforehand, particularly useful for inset sinks, where the worktop cut-out must match the product template exactly.

Can a new sink be fitted to the old connections?

In most cases yes, if the connection positions suit the new sink and the isolating valves work. The plumber checks their condition first; old valves that are seized or dripping must be replaced, otherwise the next repair becomes an emergency.

Why does it smell of drains after installation?

The most common reason is a trap fitted incorrectly or without a water seal, letting drain gases rise. Other causes are a leaking seal at the stack connection or a dried-out trap if the sink hasn't been used for a while. A plumber checks the fall and the tightness of the joints.

What kind of trap is better?

A plastic trap is cheap, easy to dismantle for cleaning, and adequate for most situations. A chromed metal one looks better on wall-hung basins where it remains visible, but is harder to clean. What matters is that the chosen model has a water seal and access for clearing blockages.

Other services in Șcheia

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Sink Installation in other locations in Iași

Pașcani Iași Tansa (Belcești) Ulmi Stolniceni-Prăjescu Onești Heleșteni Cârjoaia Lunca Cetățuii Belcești Ruginoasa Șorogari Hodora Gorban Hăbășești