Sink Installation in Drobeta-Turnu Severin

About this service

Most problems that appear after a sink is fitted share the same origin: a seal overtightened, a trap installed at the wrong fall, or silicone applied to a damp surface. An experienced plumber tightens connections hand-tight plus a quarter turn with a spanner and no more, because a forced thread cracks the plastic nut and starts dripping weeks later. The trap is fitted with a continuous fall towards the stack, with no horizontal sections where residue collects, and the water seal must be maintained to block drain odours. Silicone sealing is done on a perfectly dry, degreased surface, otherwise the bead lifts within months and water reaches under the worktop, where it swells the chipboard beyond repair.

Sink Installation in Drobeta-Turnu Severin, Mehedinți

Drobeta-Turnu Severin is one of the main towns in Mehedinți county, in the historical region of Oltenia.

Sink Installation in Mehedinți

Mehedinți County, in southwestern Oltenia, has its capital at Drobeta-Turnu Severin — an ancient Roman center on the Danube bank, at the entrance to the Danube Gorge known as the Iron Gates. With a population of around 240,000, the county combines Danube and Iron Gates Natural Park tourism with diversified agriculture on the Mehedinți Plateau. The local economy is being revitalized through investment in tourism and infrastructure, capitalizing on the region's spectacular natural setting.

Estimated Prices — Sink Installation in Drobeta-Turnu Severin

Service	Estimated Price
Kitchen sink fitted to worktop	180–380 RON
Wall-hung or pedestal basin	150–320 RON
Sink replacement incl. removing the old one	220–450 RON
Tap installation (separate)	90–200 RON
Worktop cut-out for inset sink	120–280 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a sink installation

Check the condition of the isolating valves and replace them now if they're old or seized
Don't soak the siliconed perimeter during the first 24 hours after installation
Ask for a pressure test and check under the sink yourself with dry paper before the tradesperson leaves
Choose a trap with access for clearing, to avoid full dismantling at the first blockage
Agree in advance who disposes of the old sink, especially if it's cast iron
Buy the sink before calling the plumber so they can see the mounting type and dimensions

Frequently Asked Questions

Why does it smell of drains after installation?

The most common reason is a trap fitted incorrectly or without a water seal, letting drain gases rise. Other causes are a leaking seal at the stack connection or a dried-out trap if the sink hasn't been used for a while. A plumber checks the fall and the tightness of the joints.

What kind of trap is better?

A plastic trap is cheap, easy to dismantle for cleaning, and adequate for most situations. A chromed metal one looks better on wall-hung basins where it remains visible, but is harder to clean. What matters is that the chosen model has a water seal and access for clearing blockages.

How long should I wait before using the sink?

You can use it immediately for brief use, but sanitary silicone needs 12–24 hours to cure fully. During that time avoid soaking the sealed perimeter, otherwise the bead won't adhere properly and will lift within months.

Can a sink be fitted into a chipboard worktop?

Yes, that's the most common situation in kitchens. The cut edge must be sealed without fail, with silicone or a special lacquer, because chipboard absorbs water and swells irreversibly. This is the most frequent hidden defect in rushed installations.

Does the plumber remove the old sink in Drobeta-Turnu Severin?

Removal is usually included, but transporting and disposing of the old sink is often charged separately. Some tradespeople in Drobeta-Turnu Severin will take it for a small fee, others leave it with the client. Clarify this when requesting a quote, particularly for cast iron sinks, which are very heavy.

What's the difference between inset, top-mounted, and undermount sinks?

An inset sink sits in the worktop cut-out with the rim visible above — the simplest to fit. An undermount sink is fixed from below, giving a clean look but requiring a stone or composite worktop. Top-mounted models sit entirely above and are the easiest to replace later.

Other services in Drobeta-Turnu Severin

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling