Apartment Electrical Wiring in Turda

About this service

A properly rewired installation gives you peace of mind for the next 30–40 years. The electrician sizes each circuit to the load it feeds, uses copper conductors of 1.5 mm² for lighting, 2.5 mm² for sockets, and 4–6 mm² for heavy appliances, runs everything in conduit so a new cable can be pulled later, and separates circuits so a single fault doesn't leave the whole flat without power. Earthing is provided at every socket, and at completion the insulation resistance and the continuity of the protective conductor are measured, with the results recorded in writing.

Apartment Electrical Wiring in Turda, Cluj

Turda is one of the main towns in Cluj county, in the historical region of Transylvania. Many professionals working here also cover nearby localities such as Cluj-Napoca, Câmpia Turzii, Gherla, so you can still receive offers when the right specialist is just around the corner.

Apartment Electrical Wiring in Cluj

Cluj County, with its capital at Cluj-Napoca — the largest IT and university hub in Transylvania, with nearly 320,000 inhabitants — is one of Romania's most important economic growth poles. The county's economy is diversified, with a European-scale technology and outsourcing services sector alongside industry, agriculture, and active cultural tourism. The labor market is highly competitive, and demand for professional services at all levels is among the highest in the country.

Estimated Prices — Apartment Electrical Wiring in Turda

Service	Estimated Price
Full rewire, studio flat	3,500–7,000 RON
Full rewire, 2-room flat	5,500–11,000 RON
Full rewire, 3–4 room flat	8,000–18,000 RON
New circuit (route, box, socket)	180–380 RON
Wall chasing (linear metre)	18–35 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a apartment electrical wiring

Request a plan of the cable routes so you know where it's safe to drill
Check that every socket has the protective conductor properly connected, not just contact to the housing
Ask for the final test certificate and keep it together with the warranty
Ask for the electrician's licence number and verify it before signing the quote
Plan socket and switch positions before the chasing starts — moving them later is expensive
Add 20–30% more sockets than you think you need; the marginal cost now is small

Frequently Asked Questions

Why does aluminium wiring need replacing?

Aluminium conducts less well than copper, oxidises at connections over time, and becomes brittle, which leads to terminals that overheat. Many older installations are also undersized, with 1.5 mm² on socket circuits, and have no protective conductor. That combination is why a full rewire is the standard recommendation.

What does it mean that my flat has no earth in Turda?

It means the sockets have only two conductors, live and neutral, without the third protective conductor. Without it, a fault can leave an appliance casing live, and the protective devices won't reliably trip. In Turda blocks built before the 1990s this is common and can only be resolved by rewiring.

What cable size is used for each circuit?

The usual standard is 1.5 mm² copper for lighting circuits, 2.5 mm² for general sockets, and 4 or 6 mm² for heavy appliances such as an electric hob, water heater, or air conditioning. The cross-section is always matched to the breaker rating in the board, never the other way round.

How many sockets should each room have?

A practical rule is a minimum of 4–6 sockets in a living room, 4 in a bedroom, and 6–10 in a kitchen, where the appliance load is highest. It's worth adding extras from the start: one more socket during the work costs very little compared to opening walls again a few years later.

Can cables be installed without chasing the walls?

There are alternatives: surface-mounted PVC trunking, running above a plasterboard ceiling, or pulling through existing conduit if it's clear and sound. Each has aesthetic or practical limitations. Chasing into the wall remains the standard approach in a full renovation.

Should we run network or TV cables now?

This is the ideal moment. Even if you mostly use wireless, a network cable to the TV, desk, or the spot where the router will sit costs very little now and is impossible to add neatly later. The same logic applies to spare empty conduits left in place.

Other services in Turda

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Apartment Electrical Wiring in other locations in Cluj

Cluj-Napoca Câmpia Turzii Gherla Dej