Sink Installation in Tătaru

About this service

Fitting a sink looks like a simple job, but doing it properly requires preparation and attention to details that only show up months later. A professional plumber checks the position of existing connections, cuts or adjusts the worktop if needed, fits the tap to the sink before installation — far easier than afterwards — makes the hot and cold connections with quality flexible hoses, fits the trap with the correct seals, secures the sink to its cabinet, worktop, or wall depending on type, seals the perimeter with anti-mould sanitary silicone, and pressure-tests thoroughly to catch any leak. The service covers inset and top-mounted kitchen sinks, wall-hung and pedestal basins, double bowls, and replacing an old sink including removal. On SmallJobs you'll find experienced plumbers with real reviews and competitive rates.

Sink Installation in Tătaru, Prahova

Tătaru is a locality in Prahova county, in the historical region of Muntenia. Many professionals working here also cover nearby localities such as Ploiești, Câmpina, Bertea, so you can still receive offers when the right specialist is just around the corner.

Sink Installation in Prahova

Prahova County, at the foot of the Carpathians, has in Ploiești — with around 200,000 inhabitants — the traditional capital of the Romanian petroleum industry and an important economic center in proximity to Bucharest. Câmpina, Sinaia, Bușteni, and other localities in the Prahova Valley round out a county with an extremely diversified economy: oil and chemicals, mountain and ski tourism, agriculture, and a well-developed services sector. Easy access via the A3 and DN1 makes Prahova a strategic county in the national road infrastructure.

Estimated Prices — Sink Installation in Tătaru

Service	Estimated Price
Kitchen sink fitted to worktop	140–300 RON
Wall-hung or pedestal basin	120–250 RON
Sink replacement incl. removing the old one	170–350 RON
Tap installation (separate)	70–160 RON
Worktop cut-out for inset sink	90–220 RON

Prices are indicative and may vary.

How SmallJobs Works

1

Post the job

Describe what you need, choose a category and location. It's free and takes under a minute.

2

Receive offers

Professionals in your area contact you with offers and availability.

3

Choose your pro

Compare profiles, reviews, and prices. Pick whoever fits best.

4

Get it done

The professional comes and completes the work. Leave a review to help the community.

Post a Job for Free

What to check before hiring a sink installation

Choose a trap with access for clearing, to avoid full dismantling at the first blockage
Agree in advance who disposes of the old sink, especially if it's cast iron
Buy the sink before calling the plumber so they can see the mounting type and dimensions
Ask for the tap to be fitted to the sink before installation — it's far easier and seals better
Insist on sealing the cut edge of a chipboard worktop, otherwise it swells over time
Check the condition of the isolating valves and replace them now if they're old or seized

Frequently Asked Questions

What's the difference between inset, top-mounted, and undermount sinks?

An inset sink sits in the worktop cut-out with the rim visible above — the simplest to fit. An undermount sink is fixed from below, giving a clean look but requiring a stone or composite worktop. Top-mounted models sit entirely above and are the easiest to replace later.

Can I fit a sink myself?

Technically it's possible for a straightforward replacement on existing connections. The risks lie in overtightening plastic parts, sealing incorrectly, and the trap's water seal. A slow leak under a worktop can destroy the cabinetry before it's noticed, and the repair far exceeds the cost of installation.

What warranty comes with the installation?

Labour is usually warranted for 6–24 months. The sink and tap carry the manufacturer's warranty, but conditional on correct installation. Ask for a receipt or invoice confirming the work was done by a professional — that's the document that matters in any claim to the manufacturer.

Can the sink be moved elsewhere in the kitchen?

Yes, but that becomes a plumbing alteration rather than a simple installation. It means extending the supply pipes and, more importantly, the waste, which must maintain a continuous fall to the stack. The cost rises significantly, and in flats the maximum distance is limited by the available fall.

How much does sink installation cost in Tătaru?

For a kitchen sink fitted into a worktop, labour typically falls between 110 and 380 RON, depending on area and complexity. A bathroom basin costs 95–320 RON. If the old sink needs removing and disposing of, add 50–120 RON.

How long does installation take?

A sink fitted to existing connections takes 1–2 hours. If the worktop needs cutting, connections need moving, or an old sink is stuck fast with cured silicone, the job can reach 3–4 hours. Silicone curing time adds another 12–24 hours before heavy use.

Other services in Tătaru

Electrician Plumbing Painting / Decorating Cleaning Services Home Repairs Interior Renovations Exterior Renovations Furniture Assembly Moving / Transport Lawn Mowing / Gardening Carpentry Tiling

Sink Installation in other locations in Prahova

Ploiești Câmpina Bertea Cărbunești Coada Izvorului Călugăreni Valea Scheilor Rachieri Brebu Megieșesc Mănești Tinosu Valea Călugărească Tomșani Olteni Valea Stâlpului